Contact us
Contact Hotline
+8676987937118 86-13902617335


Add:No.6 Keyuan 8th Road,Keyuan Industrial Park,Tianxin Village,Tangxia Town,Dongguan City,Guangdong Province,China
Main points of automatic three-dimensional mask machine maintenance
Main points of automatic three-dimensional mask machine maintenance
In the process of producing masks, the maintenance of the integrated mask machine is very important. Good maintenance of the integrated mask machine can not only delay the decline of the accuracy of the mask machine, but also reduce the probability of maintenance of the mask machine equipment.
I. Appearance:
The face mask machine is used to wear on the face, and some even need to be used in the operating room, so the production of masks requires the mask machine to be cleaned daily. At the end of each day, you can arrange for personnel to clean the work surface of the equipment and the plates that hold masks after the power is turned off. Pay attention to the use of water, oil, and other non-toxic and volatile cleaning solutions.

Second, the ultrasonic system: (consisting of an ultrasonic electric box, an ultrasonic transducer, a welding head, and a connecting wire)
Check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer (vibrator), welding head (mold). It is necessary to dry and clean without water, and whether the connection line is firm. Always check the wear of the ultrasonic welding head (mold). Pay attention to observe whether the pointer of the voltmeter and ammeter on the ultrasonic electric box is normal.
Third. Transmission system:
The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. For maintenance of the South Lijin mask machine, you need to check whether the surface of the motor has dust and other things that affect heat dissipation, whether the gears and sprockets are oiled, and whether there are attachments . Is the chain tightness appropriate? Is there any foreign matter? Is the connecting screw of each transmission part loose? Is the lubricant of the reducer sufficient? Usually, the oil needs to be changed once every 1000 hours to 1500 hours.
Fourth, the electrical system:
Check whether the circuit connector of the mask machine is loose, and whether the main power cable, branch signal cable, etc. are worn. Ageing? Loose? Is the inside of the electric box clean and boring, and whether the exhaust fan is operating normally?
Fifth: Pneumatic system: (composed of air source filtering system, air pipe, cylinder)
Air filter to see if there is water? (Air compressor drains water: the area with high humidity should drain water to the compressor every day). Check for air leaks in the trachea? Is there a leak in the cylinder? Cylinder magnetic anti-sensor orientation and operation is normal.
KYD has always focused on various mask production and processing equipment and various non-woven fabric application equipment, including various flat mask equipment, cup mask equipment, folding mask equipment, and special-shaped mask equipment. After years of unremitting efforts by KYD people, mask equipment products have been widely recognized and praised by our customers for their excellent quality, exquisite workmanship, and good reputation. The KYD brand has established an indispensable position in the industry. Every day, we are improving, but we remain humble!